Gigabyte Motherboard – B460M DS3H (rev. 1.0)
اطلب من خلال الواتسابProduct Description
CPU support: Support for 10th Generation Intel Core i9 processors/Intel Core i7 processors/Intel Core i5 processors/Intel Core i3 processors/Intel Pentium processors/Intel Celeron processors in the LGA1200 package
Chipset : Intel B460 Express Chipset
DDR4 Memory :
Intel Core i9/i7 processors : Support for DDR4 2933/2666/2400/2133 MHz
Intel Core i5/i3/Pentium/Celeron processors : Support for DDR4 2666/2400/2133 MHz
Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
Support for Extreme Memory Profile (XMP) memory modules
Memory Channel : Dual
RAM Slots : 4
Max Memory (GB) : 128 (32 GB single DIMM capacity)
Onboard Graphics :
1 x D-Sub port, supporting a maximum resolution of 1920×1200@60 Hz
1 x DVI-D port, supporting a maximum resolution of 1920×1200@60 Hz (The DVI-D port does not support D-Sub connection by adapter.)
1 x HDMI port, supporting a maximum resolution of 4096×2160@30 Hz (Support for HDMI 1.4 version and HDCP 2.3.)
Expansion slots :
1 x PCI Express x16 slot, running at x16 (PCIEX16)
2 x PCI Express x1 slots
(All of the PCI Express slots conform to PCI Express 3.0 standard.)
Storage Interface :
1 x M.2 connector (Socket 3, M key, type 2242/2260/2280 SATA and PCIe x4/x2 SSD support)
6 x SATA 6Gb/s connectors
Support for SATA RAID 0, RAID 1, RAID 5, and RAID 10
LAN : Realtek GbE LAN chip (1000 Mbit/100 Mbit)
USB :
Chipset:
6 x USB 3.2 Gen 1 ports (4 ports on the back panel, 2 ports available through the internal USB header)
2 x USB 2.0/1.1 ports on the back panel
Chipset+USB 2.0 Hub:
4 x USB 2.0/1.1 ports available through the internal USB headers
Internal I/O Connectors :
1 x 24-pin ATX main power connector
1 x 8-pin ATX 12V power connector
1 x CPU fan header
2 x system fan headers
2 x RGB LED strip headers
6 x SATA 6Gb/s connectors
1 x M.2 Socket 3 connector
1 x front panel header
1 x front panel audio header
1 x USB 3.2 Gen 1 header
2 x USB 2.0/1.1 headers
1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only)
2 x serial port headers
1 x Clear CMOS jumper
Back Panel Connectors :
1 x PS/2 keyboard/mouse port
1 x D-Sub port
1 x DVI-D port
1 x HDMI port
4 x USB 3.2 Gen 1 ports
2 x USB 2.0/1.1 ports
1 x RJ-45 port
3 x audio jacks
I/O Controller : iTE I/O Controller Chip
H/W Monitoring :
Voltage detection
Temperature detection
Fan speed detection
Overheating warning
Fan fail warning
Fan speed control (Whether the fan speed control function is supported will depend on the fan you install.)
Bios :
2 x 128 Mbit flash
Use of licensed AMI UEFI BIOS
Support for DualBIOS™
PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
Form Factor : Micro ATX Form Factor; 24.4cm x 22.5cm
Operating System : Support for Windows 10 64-bit
Reviews
There are no reviews yet.